成果/Result
- Dynamic Recrystallization and Grain Refinement in Extruded AZ31 Rod During Hot Torsion Deformation at 150°C被引量：23收藏
- 作者：Chen, Hongbing Song, Bo Guo, Ning Liu, Tingting Zhou, Tao
- 机构：Southwest Univ;Southwest Univ;Chongqing Univ Technol;Guizhou Inst Technol
- 来源：METALS AND MATERIALS INTERNATIONAL 2019
- 关键词：Magnesium alloys Hot torsion Dynamic recrystallization Texture
- Dependence of Microstructure and Hardening Behavior on Torsion Strain and Strain Rate in Extruded AZ31 Rods被引量：15收藏
- 作者：Chen, Hongbing Liu, Tianmo Yu, Hongni Song, Bo Hou, Dewen
- 机构：Chongqing Univ;Southwest Univ;Southwest Univ;Guizhou Inst Technol
- 来源：ADVANCED ENGINEERING MATERIALS 2016
- 关键词：Hardness - Torsional stress - Deformation - Hardening - Magnesium alloys - Strain rate
- Reducing tension - compression yield asymmetry by free end torsion in extruded Mg alloy被引量：11收藏
- 作者：Chen, H. B. Liu, T. M. Zhang, Y. Zhai, Y. B. He, J. J.
- 机构：Southwest Univ;Chongqing Univ;Guizhou Inst Technol
- 来源：MATERIALS SCIENCE AND TECHNOLOGY 2016
- 关键词：Magnesium alloys Twinning Slip Yield asymmetry Free end torsion
- 预应变和热处理对AZ31镁合金形变行为的影响（英文）被引量：6收藏
- 作者：陈红兵 刘天模 卢立伟 何杰军 翟彦博
- 机构：重庆大学材料科学与工程学院;西南大学工程技术学院;湖南科技大学机电工程学院;中南大学材料科学与工程学院;贵州理工学院材料与冶金工程学院
- 来源：《Transactions of Nonferrous Metals Society of China》 2015
- 关键词：AZ31镁合金 孪生 退火硬化 预压缩 热处理 形变
- 摘要：对挤压态AZ31镁合金进行预压缩和热处理,研究预压缩和热处理对其形变行为的影响。结果表明:在低温下退火(170℃退火4 h),试样经过退火处理或未经退火处理的几乎具有相等的屈服强度(~148 MPa),这是由于它们的显微...
- 其他来源数据库：
万方期刊数据库
同方期刊数据库
- A theoretical study on atomic motion during twinning for magnesium被引量：0收藏
- 作者：He, Jiejun Wu, Lushu
- 机构： School of Materials and Metallurgical Engineering; College of Mechanical Engineering
- 来源：Materials Transactions 2017
- 关键词：Atoms
- Precipitation behavior and its effects on mechanical properties in a pre-Twinned Mg6Al1Zn alloy被引量：0收藏
- 作者：He, Jiejun Wu, Lushu Sun, Qihui Zhai, Liping
- 机构： School of Materials and Metallurgical Engineering; College of Mechanical Engineering
- 来源：Materials Transactions 2018
- 关键词：Atoms - Tensile strength - Precipitation (chemical) - Ternary alloys - Zinc alloys - Yield stress - Aluminum alloys
