文献类型：期刊文献

英文题名：Experiments on formation mechanism of root humping in high-power laser autogenous welding of thick plates with stainless steels

作者：Zhang, Mingjun Zhang, Yingzhe Mao, Cong Hu, Yongle Chen, Genyu Bi, Zhuming

第一作者：Zhang, Mingjun

通信作者：Zhang, MJ[1]

机构：[1]Changsha Univ Sci & Technol, Educ Dept Hunan Prov, Key Lab Lightweight & Reliabil Technol Engn Vehic, Changsha 410114, Hunan, Peoples R China;[2]Guizhou Inst Technol, Coll Mat & Met Engn, Guiyang 550003, Guizhou, Peoples R China;[3]Hunan Univ, State Key Lab Adv Design & Mfg Vehicle Body, Changsha 410082, Hunan, Peoples R China;[4]Purdue Univ Ft Wayne, Dept Civil & Mech Engn, Ft Wayne, IN 46805 USA

第一机构：Changsha Univ Sci & Technol, Educ Dept Hunan Prov, Key Lab Lightweight & Reliabil Technol Engn Vehic, Changsha 410114, Hunan, Peoples R China

通信机构：corresponding author), Changsha Univ Sci & Technol, Educ Dept Hunan Prov, Key Lab Lightweight & Reliabil Technol Engn Vehic, Changsha 410114, Hunan, Peoples R China.

年份：2019

卷号：111

起止页码：11-19

外文期刊名：OPTICS AND LASER TECHNOLOGY

收录：;EI(收录号：20183905869716);Scopus(收录号：2-s2.0-85053807572);WOS:【SCI-EXPANDED(收录号:WOS:000453499600003)】；

基金：The authors are grateful to the financial support from the National Natural Science Foundation of China (No. 51605045, 51641502), the Natural Science Foundation of Hunan Province of China (No. 2018JJ2437, 2015JJ3003).

语种：英文

外文关键词：Laser autogenous welding; Thick plates; Root hump; Focal position; High-speed imaging

摘要：Deep penetration laser welding is an efficient and effective way to produce the heavy section structure. Deep penetration can be achieved by high-power autogenous laser welding; however, it poses a significant challenge in obtaining good quality of welds, which are free of imperfects such as root hump, under-fill, and collapse. It is partially attributed to a lacking of understanding on the formation of imperfects. In this paper, we looked into the formation mechanism of root humping experimentally. The laser autogenous welding were implemented using a 10 kW fiber laser on thick stainless steel plates. A high-speed imaging system was applied to observe the metallic vapor and molten pool flow during the welding process. The formation mechanism of root humping with different focal positions were analyzed and discussed. The results showed that the most important welding parameter was the focal position; it had a strong effect on the formation of root hump; it affected the penetration mode of laser keyhole welding. The root hump had a large volume and were generated periodically when a positive defocus was applied. When a negative defocus was applied, the root hump had a small volume and with no obvious periodicity. On the other hand, the welding speed could be optimized to suppress root hump only when a negative defocus was applied. Finally, applying a bottom shielding gases played a positive role in reducing root hump. The results from our study provides the evidences to develop the strategies to suppress root hump during high-power laser autogenous welding on thick metal plates.