文献类型：期刊文献

英文题名：Fabrication of Sb2S3 thin films by magnetron sputtering and post-sulfurization/selenization for substrate structured solar cells

作者：Luo, Jingting Xiong, Wei Liang, Guangxing Liu, Yike Yang, Haozhi Zheng, Zhuanghao Zhang, Xianghua Fan, Ping Chen, Shuo

第一作者：Luo, Jingting

通信作者：Chen, S[1]

机构：[1]Shenzhen Univ, Coll Phys & Optoelect Engn, Coll Mat Sci & Engn, Shenzhen Key Lab Adv Thin Films & Applicat, Shenzhen 518060, Peoples R China;[2]Guizhou Inst Technol, Sch Mat & Met Engn, Guiyang 550003, Peoples R China;[3]Univ Rennes, ISCR, CNRS, UMR 6226, F-35000 Rennes, France

第一机构：Shenzhen Univ, Coll Phys & Optoelect Engn, Coll Mat Sci & Engn, Shenzhen Key Lab Adv Thin Films & Applicat, Shenzhen 518060, Peoples R China

通信机构：corresponding author), Shenzhen Univ, Coll Phys & Optoelect Engn, Coll Mat Sci & Engn, Shenzhen Key Lab Adv Thin Films & Applicat, Shenzhen 518060, Peoples R China.

年份：2020

卷号：826

外文期刊名：JOURNAL OF ALLOYS AND COMPOUNDS

收录：;WOS:【SCI-EXPANDED(收录号:WOS:000519269300022)】；

基金：This work was supported by National Key R&D Program of China (No. 2018YFE0203400), The Key Project of Department of Education of Guangdong Province (No. 2018KZDXM059), National Natural Science Foundation of China (No. 61404086, 51604088), Shenzhen Key Lab Fund (ZDSYS 20170228105421966), Science and Technology plan project of Shenzhen (20190726221232961) and Natural Science Foundation of SZU (Grant No. 85304/00000297, 827/000342).

语种：英文

外文关键词：Sb2S3; Magnetron sputtering; Post-sulfurization/post-selenization; Substrate structure; Thin film solar cells

摘要：Antimony sulphide (Sb2S3) as an environment-friendly and cost-efficiently photovoltaic material has drawn tremendous research attentions. To broaden its scope of applications as flexible or tandem devices, Sb2S3 solar cells with substrate structure that are rarely reported and really need further exploration. In this work, an efficient method of magnetron sputtering using Sb2S3 target followed with postsulfurization or post-selenization heat treatment process has been used to prepare S-Sb2S3 and Se-Sb2S3 thin films, then substrate structured Sb2S3 solar cells with configuration of Mo/Sb2S3/CdS/ITO/Ag were fabricated. The solar cell based on crystalline S-Sb2S3 thin film can achieve power conversion efficiency (PCE) of 0.49%. In contrast, a post-selenization treatment can induce the formation of Sb-2(S,Se)(3) ternary phase and obtain high-quality thin film with uniform granular crystals. The corresponding substrate structured thin film solar cell shows a significant two times improvement of PCE to 0.95%, also with an increased external quantum efficiency (EQE) value and an extended response region, which can be attributed to the Se-Sb2S3 thin films with lower band gap, better crystallinity and less recombination loss. The combined features of advantageous vacuum preparation process and efficient substrate device structure further demonstrated its attractive application potential in thin film photovoltaic scenarios. (C) 2020 Elsevier B.V. All rights reserved.