文献类型：期刊文献

中文题名：成核剂对聚丙烯非等温结晶动力学的影响

英文题名：Influence of Different Nucleating Agents for Polypropylene Non-isothermel Crystallization Kinetics

作者：李杨 娄金分 周琴

第一作者：李杨

机构：[1]贵州理工学院材料与冶金工程学院;[2]国家复合改性聚合物材料工程技术研究中心;[3]贵州理工学院工程实训中心

第一机构：贵州理工学院材料与冶金工程学院

年份：2016

卷号：44

期号：17

起止页码：75-77

中文期刊名：广州化工

外文期刊名：Guangzhou Chemical Industry

基金：贵州省科技厅贵州理工学院联合基金项目(黔科合LH字[2014]7371号)

语种：中文

中文关键词：聚丙烯;结晶动力学;成核剂

外文关键词：polypropylene; crystallization kinetics; nucleating agent

摘要：采用了差示扫描量热仪（DSC）研究了PP和PP/成核剂的结晶行为,并分析了成核剂对PP结晶行为的影响,并用Jeziorny法对所得的数据进行动力学分析。结果表明,成核剂的加入使结晶温度提高了约12℃,结晶速率提高,当TMA和TMB复配时提升更明显。用Jeziorny法分析发现Avrami指数n在2.42-2.64之间变化,同时加入成核剂后,PP结晶速率常数明显提高。
The crystallization behavior of PP and PP / nucleating agents was studied by differential scanning calorimetry（ DSC）,the effect of nucleating agent on the crystallization behavior of PP was analyzed,and the kinetic analysis by Jeziorny method of the data obtained was analyzed. The results showed that the crystallization temperature with the nucleating agent increased about 12 ℃,and the crystallization rate was increased,especially for the TMA and TMB mixtures. The change of Avrami index n in 2. 42 - 2. 64 by Jeziorny method and the crystallization rate of PP were significantly increased after the addition of nucleating agent.