文献类型：期刊文献

中文题名：戈塘金矿房柱法开采围岩稳定性分析

英文题名：Stability Analysis of Surrounding Rock of Chamber and Pillar Mining in Getang Gold Mine

作者：陈洲 左宇军

机构：[1]贵州理工学院矿业工程学院,贵州贵阳550003;[2]贵州大学矿业学院,贵州贵阳550025

第一机构：贵州理工学院矿业工程学院

年份：2020

卷号：28

期号：2

起止页码：271-277

中文期刊名：黄金科学技术

外文期刊名：Gold Science and Technology

收录：CSCD:【CSCD_E2019_2020】；

基金：国家自然科学基金项目“动力扰动下断层活化诱发煤与瓦斯突出机理研究”(编号:51574093);贵州省应用基础研究计划重大项目“贵州复杂构造区页岩气赋存与渗透机制研究”(编号:JZ字[2014]2005);贵州省科技厅基础研究计划(科学技术基金项目)“南方岩溶地区地下暗河下采煤保水机理研究”(编号:黔科合基础[2020]1Y215)和国家自然科学基金项目“黔西南微细浸染型金矿床开采巷道围岩采动致灾与控制机理研究”(编号:51964007)联合资助。

语种：中文

中文关键词：房柱法;围岩稳定性;承载机理;矿柱;矿房跨度;数值分析;戈塘金矿

外文关键词：chamber and pillar method;stability of surrounding rock;bearing mechanism;pillar;the span of mineroom;numerical analysis;Getang gold mine

摘要：戈塘金矿矿体厚度变化较大,地质条件复杂。为科学设计井下采场参数,分析采空区顶板的破坏机理及矿柱的承载机理,指导矿山安全生产,以戈塘金矿为研究对象,设计了采场参数,分析了采场围岩稳定性。通过理论计算,采用房柱法开采时,推荐矿柱尺寸为3 m×3 m,矿房跨度不超过10 m;利用有限元软件Phase2对留设不同宽高比的矿柱时采场围岩的稳定性进行了数值模拟分析。结果显示:矿柱内部出现应力集中,采空区顶底板、岩帮为应力降低区域;随着矿柱宽高比的增大,采空区边界附近的应力水平和位移降低,矿柱内应力集中得到缓解,变形量降低。综合分析认为,矿柱宽高比对采场围岩稳定性有一定影响,保持矿柱宽高比约为0.500,可以较好地维持采场稳定。
The room and pillar method is one of the mining methods with high labor productivity,which is widely used in small metal mines.Getang gold mine is located in Anlong County,southwest Guizhou Province,with complex geological conditions.The gold ore body directly covers the undulating paleo-karst erosion surface of the Maokou Formation,and its thickness varies from 0.3 m to 76.0 m.The lithology of the top and bottom of the ore body is complex.In order to design the parameters of underground stope scientifically,analyze the failure mechanism of the roof of the goaf and the bearing mechanism of the pillar,and guide the safe production of the mine,this paper used the theoretical calculation combined with the numerical simulation method to reasonably select the stope parameters and carry out the numerical analysis of the surrounding rock stability of the stope.Through the calculation of the mining span theory,the span of the mine is ≤10 m and the recommended pillar size is 3 m×3 m.Due to the large variation of the thickness of the orebody,the stability of the surrounding rock of the stope should be analyzed under different mine height conditions.In this paper,a numerical model of pillar width of 0.300,0.375 and 0.500 was established by using the finite element Phase 2,and the stability of the surrounding rock in the stope was analyzed by numerical simulation.The simulation results show that when the pillar width-to-depth ratio is 0.300,0.375,0.500,the average stress levels of the floor in the goaf are 12.78,8.04,7.03 MPa.The average stress levels of the rock mass are 19.02,13.03,13.06 MPa.The average stress levels of the roof of the goaf are 10.73,7.20,6.04 MPa;The average stress levels inside the pillar are 28.07,18.62,18.54 MPa;The average displacements near the floor of the goaf are 0.83,0.67,0.62 mm;The average displacement near the rock dam is 2.52,1.27,0.95 mm;The average displacement near the top plate is 8.53,4.73,4.45 mm(maximum displacement is 9.80,5.55,5.27 mm);The average internal displacement of the pillar are 2.05,0.93,0.68 mm,respectively.According to the com-prehensive analysis,we can conclude that:(1)After the mining,the stress concentration inside the pillar is affected by the supporting pressure,and the floor,rock and roof of the goaf are the stress reduction area;the stress level inside the pillar is the highest near the boundary of the goaf.The stress level inside the rock core is second,and the stress level of the floor and roof of the goaf is the lowest(.2)After the mining,the maximum displacement occurs in the vicinity of the roof of the goaf due to the occurrence of the fracture zone and the plastic zone and the pressure of the overburden. Due to the conduction of support pressure,the displacement value of the pillar from top to bottom is gradually reduced.(3)The maximum stress value and maximum displacement inside the pillar appear at the top of the pillar;The pillar width-to-depth ratio has a certain influence to the stability of the surrounding rock of the stope.With the increase of width-to-depth ratio,the average stress level and average displacement near the boundary of the goaf are reduced,the stress concentration in the pillar is alleviated,and the deformation is reduced. In the process of mining,the size of the pillar should be increased appropriately at the location where the depth of the ore body is large and the thickness of the ore body is large.Keeping the width-to-depth ratio of the pillar at about 0.500 can better maintain the stability of the stope.