文献类型：期刊文献

中文题名：水下爆炸自增强技术对冷辗扩模具寿命的影响

英文题名：Influence of Self-enhancement Technology Underwater Explosion on Life of Cold Rolling Die

作者：赵秀婷

第一作者：赵秀婷

机构：[1]贵州理工学院机械工程学院

第一机构：贵州理工学院机械工程学院

年份：2016

卷号：45

期号：7

起止页码：131-134

中文期刊名：热加工工艺

外文期刊名：Hot Working Technology

收录：CSTPCD;;Scopus;北大核心:【北大核心2014】；CSCD:【CSCD_E2015_2016】；

基金：河南省教育厅自然科学项目(2011A460008)

语种：中文

中文关键词：冷辗扩芯辊;水下爆炸;自增强

外文关键词：cold rolling mandrel; underwater explosion; self-enhancement

摘要：为了提高冷辗扩芯辊的寿命,采用水下爆炸方法对其进行自增强处理。首先,利用有限元软件对冷辗扩芯辊进行了弹塑性有限元分析,得出产生自增强的最佳极限载荷值。然后,采用水下非接触爆炸的方法对冷辗扩芯辊进行爆炸处理。利用有限元软件模拟整个爆炸过程,得出药包不同质量、不同爆距、不同安放位置下作用在冷辗扩芯辊上的爆炸冲击载荷,使其达到自增强所需的最佳塑性极限载荷。验证后结果表明,经过自增强处理后的芯辊疲劳寿命远远高于未经自增强处理的芯辊疲劳寿命。
In order to improve the life of the cold rolling mandrel, the self-enhancement process of the cold rolling mandrel was carded out by using the method of the underwater explosion. First, the elastoplastic finite element analysis of the cold rolling mandrel was carded out by using finite element analysis software. The best ultimate load value of generating self enhancement was obtained. Then, the explosion treatment of the cold rolling mandrel was carded out by using non-contact underwater explosion method. The whole explosion process was simulated by using the finite element software. The explosion impact load on cold rolling mandrel with different qualities of cartridge bag, different explosion distances and different riding positions was gotten in order to reach the required best plastic limit load of self-enhancement. Verification results show that the fatigue life of the mandrel by self-enhancement process is much longer than that of non-self-reinforcing process.