文献类型：期刊文献

英文题名：Preparation and Wear Resistance of Aluminum Composites Reinforced with In Situ Formed TiO/Al2O3

作者：Qin, Q.D. Huang, B.W. Li, W. Zeng, Z.Y.

第一作者：秦庆东

通信作者：Qin, Q.D.|[14440b8f0a27c8b88f113]秦庆东;

机构：[1] Department of Materials & Metallurgy Engineering, Guizhou Institute of Technology, No. 1 Caiguan Road, Guiyang, 550003, China; [2] Department of Materials Engineering, Zhengzhou Technology College, No. 81 Zhengshang Road, Zhengzhou, 450041, China; [3] 2011 Special Functional Materials Collaborative Innovation Center of Guizhou Province, No. 1 Caiguan Road, Guiyang, 550003, China

第一机构：贵州理工学院材料与冶金工程学院

通信机构：|贵州理工学院材料与冶金工程学院

年份：2016

卷号：25

期号：5

起止页码：2029-2036

外文期刊名：Journal of Materials Engineering and Performance

收录：EI(收录号：20161602245365);Scopus(收录号：2-s2.0-84962909252)

语种：英文

外文关键词：Testing - Titanium dioxide - Friction - Particle reinforced composites - Wear of materials - Volume fraction - Wear resistance - Aluminum oxide - Powder metallurgy - Alumina - Binary alloys - Aluminum

摘要：An in situ TiO/Al2O3-reinforced Al composite is successfully prepared using a powder metallurgy route by the reaction of Ti2CO and Al powder. The Ti2CO powder is produced by carrying out a carbothermic reduction of titanium dioxide at 1000?°C. XRD results show that the final product is composed of Al, TiO, Al2O3, and Al3Ti. Morphology examination of the composite reveals the presence of bigger blocks of TiO and fine particles of Al2O3 and the volume fraction of reinforcement is found to range between 18 and 55%. As the volume fraction of the reinforced materials approaches 50%, the particles start to agglomerate. Dry sliding wear tests conducted using a conventional pin-on-disk testing machine show that the wear resistance of the composite is higher than that of the pure aluminum ingot. The wear rate of the composite increases almost linearly with the increase in the wear distance. The sliding wear test shows that as the volume fraction of the reinforced phase increases, the coefficient of friction decreases. The wear mechanism is also discussed. ? 2016, ASM International.