- 高速切削钛合金稳定性模型及极限切深预测被引量：7收藏
- 作者：黄鹏 邵芳
- 机构：广西现代职业技术学院机电工程系;贵州理工学院机械工程学院
- 来源：《机械设计与制造》 2016
- 关键词：钛合金 高速加工 颤振 切削稳定性 切深 动力学
- 摘要：针对TC4钛合金高速加工过程中颤振及切削稳定性问题进行了研究。首先根据闭环加工系统的动力学模型,建立了高速切削过程的稳定性模型,并通过解析计算的方法得到了加工过程中稳定切削极限深度与转速之间的关系。然后采用力锤敲击方法获...
- 其他来源数据库：
万方期刊数据库
同方期刊数据库
- Prediction of residual stress in the process of turning high strength alloy steel by innovative coated carbide microgroove tools被引量：5收藏
- 作者：Jiang, Hongwan He, Lin Ren, Zhongwei Shao, Fang Yuan, Sen
- 机构：Guizhou Inst Technol;Liupanshui Normal Coll
- 来源：INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 2020
- 关键词：Cemented carbide Microgroove Residual stress Prediction High strength alloy steel Turning
- 基于热力学的聚晶立方氮化硼刀具切削镍基合金的磨损机理被引量：5收藏
- 作者：胡小龙 邵芳 王仁伟
- 机构：贵州大学机械工程学院;贵州理工学院机械工程学院;山东大学机械工程学院
- 来源：《组合机床与自动化加工技术》 2020
- 关键词：聚晶立方氮化硼 镍基合金 氧化磨损 扩散磨损 化学磨损
- 摘要：文章通过切削实验研究了聚晶立方氮化硼刀具切削镍基合金的磨损机理。运用热力学基本理论推导了物质吉布斯自由能函数法,并应用到刀具前刀面氧化磨损的分析中。计算了刀具表面极易发生的化学反应的吉布斯自由能,并分析得出了发生氧化磨损...
- 其他来源数据库：万方期刊数据库同方期刊数据库
- 环槽车削加工工艺参数优化被引量：4收藏
- 作者：王仁伟 何玲 邵芳
- 机构：贵州大学现代制造技术教育部重点实验室;贵州理工学院机械工程学院
- 来源：《组合机床与自动化加工技术》 2016
- 关键词：数值计算 环槽加工 刀具磨损 最小二乘法 遗传算法
- 摘要：为了改善高强度环槽铆钉断颈槽车削加工过程切槽刀具磨损严重的问题,对环槽车削加工工艺参数与刀具磨损速度的关系进行了研究。运用正交试验法设计实验,得到不同工艺参数下切槽车刀前刀面的磨损速度。经过数据分析建立切槽车刀前刀面磨损...
- 其他来源数据库：万方期刊数据库同方期刊数据库
- 超声振动加工铝合金时切削区域温度场的仿真研究被引量：2收藏
- 作者：刘爱军 周知进 胡斌梁 邵芳
- 机构：贵州理工学院机械工程学院;湖南科技大学机电工程学院
- 来源：《机械制造》 2018
- 关键词：超声振动 铝合金 切削 温度 研究
- 摘要：机械切削加工区温度对零件内应力和刀具寿命影响较大。为了降低切削区温度,模拟超声振动加工7075-T6铝合金,分析超声振动参数对铝合金试件加工区域温度场的影响。研究结果表明,提高超声振动频率,可以降低加工区的最高切削温度;...
- 其他来源数据库：万方期刊数据库同方期刊数据库
- 多元可激发气体声弛豫频率的环境影响分析被引量：2收藏
- 作者：张克声 张向群 邵芳 唐文勇
- 机构：贵州理工学院电气与信息工程学院;许昌学院信息工程学院;贵州理工学院机械工程学院
- 来源：《计算物理》 2019
- 关键词：声弛豫频率 气体温度 气体压强 声弛豫吸收
- 摘要：推导多元可激发气体中声弛豫频率和环境温度、压强的解析关系.理论分析和仿真计算表明:声弛豫频率线性反比于主弛豫过程的弛豫时间,正比于主弛豫过程的振动耦合热容,反比于外自由度热容;温度升高导致振动耦合热容增加、内外自由度能量...
- 其他来源数据库：万方期刊数据库同方期刊数据库
- 麻花钻锥形钻尖刃磨参数的优化被引量：2收藏
- 作者：邵芳 王春江
- 机构：贵州理工学院机械工程学院;贵州理工学院贵州工业发展研究中心
- 来源：《武汉科技大学学报》 2015
- 关键词：麻花钻 钻头 刃磨参数 优化 推力 扭矩 钻削
- 摘要：为了减少麻花钻在加工过程中的轴向推力和扭矩,对其锥形钻尖的刃磨参数进行优化。首先将钻尖几何形状参数化,获得钻头横刃和主切削刃的离散模型并用于计算钻头的推力和扭矩,通过钻削试验验证了力学模型的计算精度。然后建立分别以推力、...
- 其他来源数据库：万方期刊数据库同方期刊数据库
- Diffusion and Oxidation Wear of PCBN Tool when Cutting Materials Difficult-to-cut Based on Thermodynamics被引量：1收藏
- 作者：Shao, Fang Wang, Yuting Zou, Lijing Wu, Yanying Sun, Dong
- 机构：Guizhou Inst Technol;Shanghai Int Business & Econ Univ;Binzhou Polytechn
- 来源：MECHANICAL, ELECTRONIC AND ENGINEERING TECHNOLOGIES (ICMEET 2014) 2014
- 关键词：Thermodynamics PCBN tool Diffusion wear Oxidation wear
- Diffusion and Oxidation Wear of Superhard Cutting Tool Based on Thermodynamics被引量：1收藏
- 作者：Shao, Fang Wang, Yuting Zou, Lijing Wu, Yanying Sun, Dong
- 机构：Guizhou Inst Technol;Shanghai Int Business & Econ Univ;Binzhou Polytechn
- 来源：MECHATRONICS ENGINEERING, COMPUTING AND INFORMATION TECHNOLOGY 2014
- 关键词：Thermodynamics Superhard cutting tool Diffusion wear Oxidation wear
- Mathematical model for the influence of machine tool parts deformation on machining accuracy被引量：1收藏
- 作者：Cui Ligong Liang Guiqiang Shao Fang
- 机构：Binzhou Polytech;Guizhou Inst Technol
- 来源：MECHATRONICS ENGINEERING, COMPUTING AND INFORMATION TECHNOLOGY 2014
- 关键词：Machine tool Parts deformation Machining accuracy Mathematical model
- Diffusion Wear of PCBN Tool when Cutting Materials Difficult-to-cut Based on Thermodynamics被引量：1取消收藏
- 作者：Shao, Fang Wang, Yuting Zou, Lijing Wu, Yanying Chuan, He
- 机构：Guizhou Inst Technol;Shanghai Int Business & Econ Univ;Binzhou Polytechn
- 来源：CURRENT DEVELOPMENT OF MECHANICAL ENGINEERING AND ENERGY, PTS 1 AND 2 2014
- 关键词：Thermodynamics PCBN tool Diffusion wear
- 大型金属整体件加工精度提高的方法研究被引量：1收藏
- 作者：刘爱军 周知进 邵芳 肖永山
- 机构：贵州理工学院机械工程学院;深圳信息职业技术学院机电工程系
- 来源：《机械与电子》 2015
- 关键词：切削加工 热处理 CAE技术
- 摘要：航空与机床行业的大型复杂运动件普遍采用整体式结构,其装配与加工精度提高离不开金属切削加工技术的研究。将CAE技术与金属零件加工工艺相结合,针对大型金属整体件加工提出了一套改善金属零件加工精度的系统解决方案;并采用测试技术...
- 其他来源数据库：万方期刊数据库同方期刊数据库
- Wear of PCBN tool when cutting materials difficult-to-cut based on thermodynamics entropy被引量：0收藏
- 作者：Shao, Fang Wang, Yuting Wang, Yunhai Qun, Cai
- 机构： School of Mechanical Engieering; School of Finance Management
- 来源：Metallurgical and Mining Industry 2015
- 关键词：Cutting - Diffusion - Free energy - Gibbs free energy - Oxidation - Solubility - Thermodynamics - Tribology - Wear of materials
- Finite element simulation for titanium alloy cutting by bio-mimetic wear-resistant cutter被引量：0收藏
- 作者：Liang, Gui Qiang Cui, Li Gong Shao, Fang
- 机构： School of Electrical Engineering; School of Mechanical Engineering
- 来源：Advanced Materials Research 2014
- 关键词：Biomimetics - Finite element method - Friction - Metal cutting - Morphology
- Gas equilibrium heat capacity synthesis under the influence of acoustic relaxation process and its application in gas detection被引量：0收藏
- 作者：ZHANG Kesheng ZHANG Xiangqun SHAO Fang
- 机构：School of Electrical and Information Engineering;School of Electronic Information and Communications;School of Mechanical Engineering
- 来源：[1]School of Electrical and Information Engineering,Guizhou Institute of Technology,Guiyang 550003;[2]School of Electronic Information and Communications,Huazhong University of Science and Technology,Wuhan 430074;[3]School of Mechanical Engineering,Guizhou Institute of Technology,Guiyang 550003 2019
- 其他来源数据库：万方期刊数据库同方期刊数据库
- Simulation of Machining of AlSl1045 Based on Thermodynamical Constitutive Equation被引量：0收藏
- 作者：Shao, Fang Yan, Xue Wang, Yuting Zou, Lijing
- 机构：Guizhou Inst Technol;Binzhou Polytech;Shanghai Int Business & Econ Univ
- 来源：MEASUREMENT TECHNOLOGY AND ENGINEERING RESEARCHES IN INDUSTRY, PTS 1-3 2013
- 关键词：Finite element analysis Thermodynamical constitutive equation AlSl1045
- Simulation of machining of incoloy 907 based on thermodynamics被引量：0收藏
- 作者：Shao, Fang Wang, Yu Ting Zou, Li Jing Zhang, Xian Ming Ji, Bin
- 机构： School of Mechanical Engieering; School of Finance Management; Binzhou Polytechnic
- 来源：Materials Science Forum 2014
- 关键词：Aircraft engines - Cutting tools - Machining - Superalloys - Temperature - Thermal conductivity
- Experimental study on high-temperature wear behaviors of Al2O3 ceramic tool in machining of typical workpiece materials based on thermodynamic characteristics被引量：0收藏
- 作者：Shao, Fang Jiang, Hongwan Wang, Renwei Niu, Chengcheng Zhang, Fa
- 机构： School of Mechanical Engineering; School of Mechanical Engineering; Key Laboratory of Advanced Manufacturing Technology Ministry of Education; School of Mechanical Engineering; Center of Analysis and Testing
- 来源：IPPTA: Quarterly Journal of Indian Pulp and Paper Technical Association 2018
- 关键词：Alumina - Aluminum oxide - Cast iron - Ceramic cutting tools - Cutting tools - Diffusion - Dissolution - Free energy - Gibbs free energy - Temperature - Tribology - Wear of materials
- Wear of PCBN tool when cutting materials difficult-to-cut based on thermodynamics solubility被引量：0收藏
- 作者：Shao, Fang Wang, Yuting Xiao, Yingqun Xiao, Lihua Zhang, Kesheng
- 机构： School of Mechanical Engineering; School of Finance Management; School of Electrical Engineering; School of Materials Engineering; School of Information Engineering
- 来源：Key Engineering Materials 2016
- 关键词：Cutting - Diffusion - Free energy - Gibbs free energy - Oxidation - Solubility - Temperature - Thermodynamics - Wear of materials
- 硬质合金微槽车刀切削刃近域热力强度分析被引量：0收藏
- 作者：蒋宏婉 袁森 任仲伟 邵芳 陈海虹
- 机构：贵州理工学院机械工程学院;贵州大学机械工程学院
- 来源：《组合机床与自动化加工技术》 2018
- 关键词：微槽车刀 刀屑接触区 热力耦合 切削刃近域 强度分析
- 摘要：车刀前刀面切削刃近域作为金属切削过程高温高压的集中作用区域,其热力强度对刀具切削性能有重要影响。文章以前期工作所获得的切削过程刀屑接触界面平均切削温度和平均切削力作为热载荷和机械载荷,确定出刀屑接触区域范围,合理施加约束...
- 其他来源数据库：万方期刊数据库同方期刊数据库
- The development of measurement and control system for a machine tool被引量：0收藏
- 作者：Yin, Feng-Ling Huo, Bing-Quan Shao, Fang
- 机构： School of Electrical Engineering; Information Engineering Department; School of Mechanical Engineering
- 来源：Advanced Materials Research 2014
- 关键词：Intelligent systems - Machine tools
- Program development and system integration for human-computer interface of numerical control system被引量：0收藏
- 作者：Yin, Feng Ling Huo, Bing Quan Shao, Fang
- 机构： School of Electrical Engineering; Information Engineering Department; School of Mechanical Engineering
- 来源：Advanced Materials Research 2014
- 关键词：Cardiovascular system - Computer software - Machine tools
- Diffusion wear and oxidation wear of pcbn tool when cutting materials difficult-to-cut based on thermodynamics solubility被引量：0收藏
- 作者：Shao, Fang Wang, Yu Ting Li, Jiang Hong
- 机构： School of Mechanical Engieering; School of Finance Management; Department of Laboratory and Equipment
- 来源：Materials Science Forum 2016
- 关键词：Cutting - Diffusion - Enthalpy - Free energy - Gibbs free energy - Machining - Oxidation - Temperature - Thermodynamics - Wear of materials
- Wear of PCBN Tool when Cutting Materials Difficult-to-Cut Based on Thermodynamics Solubility被引量：0收藏
- 作者：Fang Shao Caiqun Yuting Wang Yingqun Xiao Lihua Xiao
- 机构：School of Mechanical Engineering;School of Finance Management;School of Electrical Engineering;School of Materials Engineering;School of Information Engineering
- 来源：[1]School of Mechanical Engineering, Guizhou Institute of Technology, Guiyang, China;[2]School of Finance Management, Shanghai International Business and Economics University,Shanghai, Chi;[3]School of Electrical Engineering, Guizhou Institute of Technology, Guiyang, China;[4]School of Materials Engineering, Guizhou Institute of Technology, Guiyang, China;[5]School of Information Engineering, Guizhou Institute of Technology, Guiyang, China; 2015
- The development of control system for a magnetorheological finishing prototype被引量：0收藏
- 作者：Yin, Feng-Ling Huo, Bing-Quan Shao, Fang
- 机构： School of Electrical Engineering; Information Engineering Department; School of Mechanical Engineering
- 来源：Advanced Materials Research 2014
- 关键词：Design - Intelligent systems
- Wear of PCBN Tool when Cutting Materials Difficult-to-Cut Based on Thermodynamics Solubility被引量：0收藏
- 作者：Shao, Fang Wang, Yun-hai Cai, Qun Qin, Qing-dong
- 机构：Guizhou Inst Technol;Guizhou Inst Technol
- 来源：2016 INTERNATIONAL CONFERENCE ON APPLIED MECHANICS, ELECTRONICS AND MECHATRONICS ENGINEERING (AMEME 2016) 2016
- 关键词：Thermodynamics Solubility PCBN tool Diffusion wear Oxidation wear
- Diffusion and oxidation wear of superhard cutting tool based on thermodynamics solubility被引量：0收藏
- 作者：Shao, Fang Wang, Yu Ting Zou, Li Jing Wu, Yan Ying He, Chuan
- 机构： School of Mechanical Engieering; School of Finance Management; Binzhou Polytechnic
- 来源：Applied Mechanics and Materials 2014
- 关键词：Cutting - Cutting tools - Oxidation - Robotics - Thermodynamics - Tribology - Wear of materials
- Ti6Al4V车削加工时硬质合金刀具磨损的数值模拟被引量：0收藏
- 作者：王仁伟 何玲 邵芳 罗金刚
- 机构：贵州大学现代制造技术教育部重点实验室;贵州理工学院机械工程学院
- 来源：《机床与液压》 2016
- 关键词：正交试验 有限元仿真 刀具磨损
- 摘要：为研究硬质合金刀具车削加工钛合金过程中的刀具磨损,刀具选择刚性模型,工件选择塑性模型,利用有限元软件对切削过程的刀具磨损进行了模拟。运用正交试验分析了在不同刀具参数组合下刀具磨损量的变化情况。结果表明:在固定的工艺参数下...
- 其他来源数据库：万方期刊数据库同方期刊数据库
- Diffusion Wear of Al2O3ceramic tools when cutting materials based on thermodynamics solubility被引量：0收藏
- 作者：Shao, Fang Wang, Yuting Zhou, Zhijin Wang, Yunhai Xiao, Lihua
- 机构： School of Mechanical Engieering; School of Finance Management; School of Materials and Metallurgical Engineering
- 来源：Revista Tecnica de la Facultad de Ingenieria Universidad del Zulia 2016
- 关键词：Aluminum - Ceramic cutting tools - Ceramic materials - Cutting tools - Diffusion - Free energy - Gibbs free energy - Temperature - Thermodynamics
