成果/Result
- Influence of cutting velocity on gradient microstructure of machined surface during turning of high-strength alloy steel被引量：10收藏
- 作者：Jiang, Hongwan Wang, Chengyong Ren, Zhongwei Yi, Yanliang He, Lin
- 机构：Guizhou Inst Technol;Guangdong Univ Technol;Jinan Univ;Guizhou Univ
- 来源：MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 2021
- 关键词：Gradient-distribution Turning tool Microstructural control Superficial layer High-strength steel
- Effect of machining on performance enhancement of superficial layer of high-strength alloy steel被引量：8收藏
- 作者：Jiang, Hongwan Ren, Zhongwei Yi, Yanliang He, Lin Yuan, Sen
- 机构：Guizhou Inst Technol;Jinan Univ;Guizhou Univ;Guangdong Univ Technol
- 来源：JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T 2021
- 关键词：High-strength alloy steel Microstructure Superficial layer Gradient-distribution Surface performance
- Influence of Microgroove Structure on Cutting Performance and Chip Morphology during the Turning of Superalloy Inconel 718被引量：6收藏
- 作者：Zou, Zhongfei He, Lin Jiang, Hongwan Yuan, Sen Ren, Zhongwei
- 机构：Guizhou Inst Technol;Liupanshui Normal Coll;Guizhou Univ
- 来源：MATERIALS 2021
- 关键词：microgroove Inconel 718 cutting temperature tool life chip morphology
- Reverse identification of constitutive parameters of Inconel 718 alloy based on analytical model and thermo-mechanical loads analysis of machined surface被引量：5收藏
- 作者：Tian, Pengfei He, Lin Zhou, Tao Du, Feilong Zou, Zichuan
- 机构：Guizhou Univ;Liupanshui Normal Coll;Guizhou Univ;Guizhou Inst Technol
- 来源：JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T 2022
- 关键词：Constitutive model Analytical model Inverse identification Inconel 718 Tool wear
- Prediction of residual stress in the process of turning high strength alloy steel by innovative coated carbide microgroove tools被引量：4收藏
- 作者：Jiang, Hongwan He, Lin Ren, Zhongwei Shao, Fang Yuan, Sen
- 机构：Guizhou Inst Technol;Liupanshui Normal Coll
- 来源：INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 2020
- 关键词：Cemented carbide Microgroove Residual stress Prediction High strength alloy steel Turning
- Effect of Al/Ti ratio on the microstructure, texture and incipient plasticity of (CoNiCr0.5)95AlxTiy high entropy alloys被引量：4收藏
- 作者：Jiang, Hongwan Lu, Yafang An, Xulong Qin, Jiaqing Xie, Tianjin
- 机构：Guizhou Inst Technol;Shenzhen Zhongyi United Intellectual Property Agcy;Changzhou Univ;Jinan Univ;Jinan Univ
- 来源：MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 2023
- 关键词：High entropy alloy Texture Mechanical property Incipient plasticity
- Wear mechanism of the loose layer on the rake face of a new cemented carbide micro groove turning tool被引量：2收藏
- 作者：Jiang, Hongwan He, Lin Ren, Zhongwei Zhan, Gang Zou, Zhongfei
- 机构：Guizhou Inst Technol;Guizhou Univ;Liupanshui Normal Coll
- 来源：INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 2018
- 关键词：40CrMnMo Micro groove Turning tool Loose layer Diffusion wear Brittleness-weakening
- Effect of workpiece microstructure on tool wear behavior and surface quality during machining Inconel 718 alloy被引量：2收藏
- 作者：Tian, Pengfei He, Lin Zhou, Tao Du, Feilong Zou, Zichuan
- 机构：Guizhou Univ;Liupanshui Normal Coll;Guizhou Univ;Guizhou Inst Technol
- 来源：TRIBOLOGY INTERNATIONAL 2022
- 关键词：Inconel 718 Tool wear Microstructure Machinability Work harding
- On the Mechanical Properties and Thermal Conductivity of Compacted Graphite Cast Iron with Different Pearlite Contents被引量：1收藏
- 作者：Ren, Zhongwei Jiang, Hongwan Long, Shaolei Zou, Zhongfei
- 机构：Guizhou Inst Technol;Guizhou Univ;Guizhou Inst Technol
- 来源：JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE 0
- 关键词：cast iron fracture surface pearlite tensile strength thermal conductivity
- 切削过程中高强合金钢浅表层性态强化研究被引量：0收藏
- 作者：蒋宏婉 王成勇 任仲伟 陈汪林 何林
- 机构：贵州理工学院机械工程学院;广东工业大学机电工程学院;六盘水师范学院
- 来源：《机械工程学报》 2021
- 关键词：高强合金钢 微观结构 浅表层 梯度分布 表面性能
- 摘要：切削浅表层显微结构状态对机械构件力学性能和服役寿命有重要影响。为获得性能优良的切削表层,综合应用理论计算和测试分析的研究手段,对不同切削速度下高强合金钢浅表层微观结构演变和力学性能强化的内在关联展开研究。结果表明:中高切...
- 其他来源数据库：
万方期刊数据库
同方期刊数据库
- Comparative analysis of residual stress and dislocation density of machined surface during turning of high strength steel被引量：0收藏
- 作者：Jiang, Hongwan Wang, Chengyong Ren, Zhongwei He, Lin
- 机构： School of Mechanical Engineering; School of Electromechanical Engineering; Liupanshui Normal College
- 来源：Procedia CIRP 2020
- 关键词：Carbide cutting tools - Carbides - High strength steel - Microstructure - Surface analysis - Surface stress - Turning
- REInforcement effect of cutting process on machined surface quality and performance of aviation aluminum alloy 7075 based on Oxley-Welsh theory被引量：0收藏
- 作者：Jiang, Hongwan Ren, Zhongwei Zou, Zhongfei Yuan, Sen Yi, Yanliang
- 机构：Guizhou Inst Technol;Jinan Univ;Guizhou Univ
- 来源：JOURNAL OF MANUFACTURING PROCESSES 2023
- 关键词：Oxley-Welsh theory Strain-hardening effect Shear flow stress Hydrostatic stress Quality & performance
- Damage Analysis and Optimal Design of Micro-Structure Milling Cutter Based on Peridynamics被引量：0收藏
- 作者：Deng, Jing Jiang, Hongwan Yuan, Sen Yue, Xi Tian, Chuchun
- 机构： School of Mechanical Engineering; School of Mechanical Engineering
- 来源：SSRN 2023
- 关键词：Continuum mechanics - Cracks - Cutting - Heat resistance - Milling (machining) - Milling cutters - Topology
- Multiscale research of microstructure evolution during turning Ti-6Al-4V alloy based on FE and CA被引量：0收藏
- 作者：Zhou, Xiaorong He, Lin Zhou, Tao Jiang, Hongwan Xu, Jiangyi
- 机构：Guizhou Univ;Liupanshui Normal Coll;Guizhou Inst Technol
- 来源：JOURNAL OF ALLOYS AND COMPOUNDS 2022
- 关键词：Microstructure evolution FE-CA Material constitutive parameters identification Multiscale Ti-6Al-4V alloy
- Effect of Ni Content on Microstructure, Mechanical Properties, and Abrasion Behavior of Fe-B-C Alloy被引量：0收藏
- 作者：Yi, Yanliang Xing, Jiandong Jiang, Hongwan Long, Shaolei Wang, Qiwei
- 机构：Jinan Univ;Jinan Univ;Xi An Jiao Tong Univ;Guizhou Inst Technol
- 来源：TRIBOLOGY TRANSACTIONS 0
- 关键词：Fe-B-C alloy nickel hardenability abrasion resistance
- Experimental study on high-temperature wear behaviors of Al2O3 ceramic tool in machining of typical workpiece materials based on thermodynamic characteristics被引量：0收藏
- 作者：Shao, Fang Jiang, Hongwan Wang, Renwei Niu, Chengcheng Zhang, Fa
- 机构： School of Mechanical Engineering; School of Mechanical Engineering; Key Laboratory of Advanced Manufacturing Technology Ministry of Education; School of Mechanical Engineering; Center of Analysis and Testing
- 来源：IPPTA: Quarterly Journal of Indian Pulp and Paper Technical Association 2018
- 关键词：Alumina - Aluminum oxide - Cast iron - Ceramic cutting tools - Cutting tools - Diffusion - Dissolution - Free energy - Gibbs free energy - Temperature - Tribology - Wear of materials
