成果/Result
- Practical Terminal Sliding Mode Control of Nonlinear Uncertain Active Suspension Systems With Adaptive Disturbance Observer被引量：87收藏
- 作者：Wang, Gang Chadli, Mohammed Basin, Michael V.
- 机构：Guizhou Inst Technol;Univ Paris Saclay;Autonomous Univ Nuevo Leon;ITMO Univ
- 来源：IEEE-ASME TRANSACTIONS ON MECHATRONICS 2021
- 关键词：Tires Convergence Suspensions (mechanical systems) Roads Disturbance observers Active suspension systems adaptive disturbance observer (ADO) disturbance suppression terminal sliding mode control (TSMC)
- Bioinspired Nonlinear Dynamics-Based Adaptive Neural Network Control for Vehicle Suspension Systems With Uncertain/Unknown Dynamics and Input Delay被引量：50收藏
- 作者：Zhang, Menghua Jing, Xingjian Wang, Gang
- 机构：Hong Kong Polytech Univ;Univ Jinan;Guizhou Inst Technol
- 来源：IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS 2021
- 关键词：Suspensions (mechanical systems) Neural networks Delays Biological system modeling Vibrations Vehicle dynamics Nonlinear dynamical systems Active suspension systems bioinspired dynamics finite-time convergence input delay neural network uncertain unknown dynamics
- Characterization of Rolling Contact Fatigue Cracks in Rails by Eddy Current Pulsed Thermography被引量：31收藏
- 作者：Zhu, Junzhen Withers, Philip John Wu, Jianbo Liu, Feng Yi, Qiuji
- 机构：Newcastle Univ;Army Acad Armored Forces;Univ Manchester;Sichuan Univ;Guizhou Inst Technol
- 来源：IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS 2021
- 关键词：Eddy current pulsed thermography inclination angle characterization railway rails rolling contact fatigue cracks
- 3D Printing of Liquid Metals: Recent Advancements and Challenges被引量：29收藏
- 作者：Zou, Zhongfei Chen, Yuewei Yuan, Sen Luo, Nan Li, Jiachun
- 机构：Guizhou Inst Technol;Guizhou Univ;Zhejiang Univ;Zhejiang Univ
- 来源：ADVANCED FUNCTIONAL MATERIALS 0
- 关键词：3D printing flexible electronics gallium-based liquid metals
- Finite-time sliding mode tracking control for active suspension systems via extended super-twisting observer被引量：21收藏
- 作者：Wang, Gang Chen, Changzheng Yu, Shenbo
- 机构：Guizhou Inst Technol;Shenyang Univ Technol
- 来源：PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART I-JOURNAL OF SYSTEMS AND CONTROL ENGINEERING 2017
- 关键词：Finite-time control active suspension systems sliding mode control super-twisting algorithm disturbance observer
- Effect of workpiece microstructure on tool wear behavior and surface quality during machining Inconel 718 alloy被引量：21收藏
- 作者：Tian, Pengfei He, Lin Zhou, Tao Du, Feilong Zou, Zichuan
- 机构：Guizhou Univ;Liupanshui Normal Coll;Guizhou Univ;Guizhou Inst Technol
- 来源：TRIBOLOGY INTERNATIONAL 2022
- 关键词：Inconel 718 Tool wear Microstructure Machinability Work harding
- Unified Multi-Objective Genetic Algorithm for Energy Efficient Job Shop Scheduling被引量：20收藏
- 作者：Wei, Hongjing Li, Shaobo Quan, Huafeng Liu, Dacheng Rao, Shu
- 机构：Guizhou Univ;Guizhou Inst Technol;Guizhou Univ;Guizhou Univ Finance & Econ;Guizhou Financial Dev Serv Ctr
- 来源：IEEE ACCESS 2021
- 关键词：Job shop scheduling Energy consumption Manufacturing Production Optimization Genetic algorithms Energy efficiency Job shop scheduling energy efficiency unified multi-objective genetic algorithm machine status switching
- Influence of cutting velocity on gradient microstructure of machined surface during turning of high-strength alloy steel被引量：18收藏
- 作者：Jiang, Hongwan Wang, Chengyong Ren, Zhongwei Yi, Yanliang He, Lin
- 机构：Guizhou Inst Technol;Guangdong Univ Technol;Jinan Univ;Guizhou Univ
- 来源：MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 2021
- 关键词：Gradient-distribution Turning tool Microstructural control Superficial layer High-strength steel
- Effects of La and Y on the microstructure and mechanical properties of NbMoTiVSi0.3 refractory high entropy alloys被引量：15收藏
- 作者：Xie, Tianjin Jin, Fengshuo Qin, Jiaqing Qin, Lei Long, Shaolei
- 机构：Jinan Univ;Jinan Univ;Guizhou Inst Technol
- 来源：JOURNAL OF ALLOYS AND COMPOUNDS 2023
- 关键词：Refractory high entropy alloy Microstructure Mechanical properties
- 3D printed grafts with gradient structures for organized vascular regeneration被引量：15收藏
- 作者：Chen, Yuewei Zou, Zhongfei Fu, Tao Li, Zhuang Zhang, Zhaojie
- 机构：Zhejiang Univ;Guizhou Univ;Zhejiang Univ;Guizhou Inst Technol;Zhejiang Univ
- 来源：INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING 2024
- 关键词：small-diameter vascular graft smooth muscle layer 3D printing endothelialization
- A comprehensive review of tool surface texturing in the cutting process被引量：13收藏
- 作者：Zhou, Xiaorong He, Lin Zhou, Tao Yuan, Sen Tian, Pengfei
- 机构：Guizhou Univ;Liupanshui Normal Coll;Guizhou Inst Technol
- 来源：INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 0
- 关键词：Micro-textured tool Cutting mechanism Blunt cutting edge Wettability Self-lubrication Derivative cutting
- Effect of machining on performance enhancement of superficial layer of high-strength alloy steel被引量：13收藏
- 作者：Jiang, Hongwan Ren, Zhongwei Yi, Yanliang He, Lin Yuan, Sen
- 机构：Guizhou Inst Technol;Jinan Univ;Guizhou Univ;Guangdong Univ Technol
- 来源：JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T 2021
- 关键词：High-strength alloy steel Microstructure Superficial layer Gradient-distribution Surface performance
- Stretchable, flexible, and breathable MXene/dopamine/thermoplastic polyurethane nanofiber membrane with outstanding strain sensing and electromagnetic interference shielding performances被引量：11收藏
- 作者：Zhang, Chengjian Li, Jiachun Chen, Yuewei Zou, Zhongfei Zhang, Yingbo
- 机构：Guizhou Univ;Zhejiang Univ;Guizhou Inst Technol
- 来源：MATERIALS TODAY COMMUNICATIONS 2024
- 关键词：Thermoplastic polyurethane MXene Strain sensor Electromagnetic interference shielding Wearable electronic device
- Wear Properties of Aluminum Alloy 211z.1 Drilling Tool被引量：11收藏
- 作者：Liu, Yong He, Lin Yuan, Sen
- 机构：Guizhou Univ;Liupanshui Normal Coll;Guizhou Inst Technol
- 来源：JORDAN JOURNAL OF MECHANICAL AND INDUSTRIAL ENGINEERING 2021
- 关键词：Aluminum Alloy 211z.1 High-speed Steel Standard Twist Drill Drilling Test Flank Wear
- Reverse identification of constitutive parameters of Inconel 718 alloy based on analytical model and thermo-mechanical loads analysis of machined surface被引量：11收藏
- 作者：Tian, Pengfei He, Lin Zhou, Tao Du, Feilong Zou, Zichuan
- 机构：Guizhou Univ;Liupanshui Normal Coll;Guizhou Univ;Guizhou Inst Technol
- 来源：JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T 2022
- 关键词：Constitutive model Analytical model Inverse identification Inconel 718 Tool wear
- Multiscale research of microstructure evolution during turning Ti-6Al-4V alloy based on FE and CA被引量：10收藏
- 作者：Zhou, Xiaorong He, Lin Zhou, Tao Jiang, Hongwan Xu, Jiangyi
- 机构：Guizhou Univ;Liupanshui Normal Coll;Guizhou Inst Technol
- 来源：JOURNAL OF ALLOYS AND COMPOUNDS 2022
- 关键词：Microstructure evolution FE-CA Material constitutive parameters identification Multiscale Ti-6Al-4V alloy
- ESO-Based Terminal Sliding Mode Control for Uncertain Full-Car Active Suspension Systems被引量：9收藏
- 作者：Gang, Wang
- 机构：Guizhou Inst Technol
- 来源：INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY 2020
- 关键词：Fault tolerant control Vehicle active suspensions Terminal sliding mode Finite-time control
- Influence of Microgroove Structure on Cutting Performance and Chip Morphology during the Turning of Superalloy Inconel 718被引量：8收藏
- 作者：Zou, Zhongfei He, Lin Jiang, Hongwan Yuan, Sen Ren, Zhongwei
- 机构：Guizhou Inst Technol;Liupanshui Normal Coll;Guizhou Univ
- 来源：MATERIALS 2021
- 关键词：microgroove Inconel 718 cutting temperature tool life chip morphology
- Tribological Performance of Micro-Groove Tools of Improving Tool Wear Resistance in Turning AISI 304 Process被引量：7收藏
- 作者：Wu, Jinxing Zhan, Gang He, Lin Zou, Zhongfei Zhou, Tao
- 机构：Guizhou Univ;GuiZhou MinZu Univ;Guizhou Vocat Technol Coll Elect & Informat;Liupanshui Normal Colleague;GuiZhou Inst Technol
- 来源：MATERIALS 2020
- 关键词：micro-groove tool friction cutting force wear
- Investigations for inclination angle characterization of angular defects using eddy current pulsed thermography被引量：7收藏
- 作者：Liu, Feng Zhu, Junzhen Tian, Gui Yun Ulianov, Cristian Wang, Zhao
- 机构：Guizhou Inst Technol;Newcastle Univ;Army Acad Armored Forces;Newcastle Univ;Lanzhou Railway Bur
- 来源：INFRARED PHYSICS & TECHNOLOGY 2019
- 关键词：Angular defects Rolling contact fatigue cracking Inclination angle Eddy current pulsed thermography Skewness Kurtosis
- REInforcement effect of cutting process on machined surface quality and performance of aviation aluminum alloy 7075 based on Oxley-Welsh theory被引量：6收藏
- 作者：Jiang, Hongwan Ren, Zhongwei Zou, Zhongfei Yuan, Sen Yi, Yanliang
- 机构：Guizhou Inst Technol;Jinan Univ;Guizhou Univ
- 来源：JOURNAL OF MANUFACTURING PROCESSES 2023
- 关键词：Oxley-Welsh theory Strain-hardening effect Shear flow stress Hydrostatic stress Quality & performance
- Effect of Al/Ti ratio on the microstructure, texture and incipient plasticity of (CoNiCr0.5)95AlxTiy high entropy alloys被引量：6收藏
- 作者：Jiang, Hongwan Lu, Yafang An, Xulong Qin, Jiaqing Xie, Tianjin
- 机构：Guizhou Inst Technol;Shenzhen Zhongyi United Intellectual Property Agcy;Changzhou Univ;Jinan Univ;Jinan Univ
- 来源：MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 2023
- 关键词：High entropy alloy Texture Mechanical property Incipient plasticity
- Prediction of residual stress in the process of turning high strength alloy steel by innovative coated carbide microgroove tools被引量：5收藏
- 作者：Jiang, Hongwan He, Lin Ren, Zhongwei Shao, Fang Yuan, Sen
- 机构：Guizhou Inst Technol;Liupanshui Normal Coll
- 来源：INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 2020
- 关键词：Cemented carbide Microgroove Residual stress Prediction High strength alloy steel Turning
- Analyzing Forged Quality of Thin-Walled A-286 Superalloy Tube under Multi-Stage Cold Forging Processes被引量：4收藏
- 作者：Tao, Liang Feng, Zhiguo Jiang, Yulian Tong, Jinfang
- 机构：Guizhou Univ;Guizhou Inst Technol;Guizhou Univ
- 来源：MATERIALS 2023
- 关键词：cold forging thin-walled tube A-286 superalloy forging quality
- Influence of microgroove cutting tool on cutting energy and cutting performance during turning of Inconel 718被引量：4收藏
- 作者：Li, Jiachun Zou, Zhongfei
- 机构：Guizhou Univ;Guizhou Inst Technol
- 来源：JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY 0
- 关键词：Inconel 718 Microgroove Cutting energy Tool wear Tool life
- Switching arc inversion based on analysis of electromagnetic characteristics被引量：3收藏
- 作者：Zhao, Hongchen Liu, Xiaoming Wang, Gang
- 机构：Shenyang Univ Technol;Tianjin Key Lab Adv Elect Engn & Energy Technol;Guizhou Inst Technol
- 来源：RESULTS IN ENGINEERING 2019
- 关键词：Inversion method MPGA Switching arc TGSVD
- 硬质合金微坑车刀切削304不锈钢时的表面粗糙度研究被引量：3收藏
- 作者：袁森 何林 占刚 蒋宏婉 邹中妃
- 机构：贵州大学机械工程学院 贵阳550025;贵州理工学院机械工程学院 贵阳550003;贵州大学机械工程学院 贵阳550025;六盘水师范学院 六盘水550018;贵州大学
- 来源：《机械工程学报》 2018
- 关键词：微坑车刀 表面粗糙度 预测模型 304不锈钢
- 摘要：304不锈钢因其良好的工作性能和难加工性,成为金属切削加工领域的研究热点尤其是良好的加工表面质量的获取及其控制广受业界关注.基于自主研发的切削性能良好的304不锈钢专用硬质合金微坑车刀,重点研究该微坑车刀切削304不锈钢...
- 其他来源数据库：
万方期刊数据库
同方期刊数据库
- Crystallographic orientation-dependent dislocations slip during tensile testing of lath martensitic steel被引量：3收藏
- 作者：Wang, Y. B. Zhao, F. Xu, F. H. Liang, Y. L. Lei, L.
- 机构：Guizhou Univ;Guizhou Special Equipment Inspect & Testing Inst;Yangtze Univ;Guizhou Inst Technol
- 来源：MATERIALS LETTERS 2023
- 关键词：In-situ EBSD Multi-level microstructure Martensite Microstructure Dislocation slip Deformation compatibility
- Study on the Transient Injection Rate of Each Nozzle Hole in the Combustion Process of Diesel Engine被引量：3收藏
- 作者：Zhou, Liying Liang, Yu
- 机构：Guizhou Inst Technol;Guiyang Univ
- 来源：JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME 2021
- 关键词：transient injection rate of each nozzle hole combustion process diesel engine multi-hole injection nozzle fuel combustion
- Comfort-enhanced vibration control for delayed active suspensions using relaxed inequalities被引量：3收藏
- 作者：Wang, Gang Chen, Haihong Zhou, Zhijin
- 机构：Guizhou Inst Technol
- 来源：JOURNAL OF LOW FREQUENCY NOISE VIBRATION AND ACTIVE CONTROL 2019
- 关键词：Vibration control active suspensions control delay augmented Lyapunov-Krasovskii functional Bessel-Legendre inequality
